|
Monel K-500 K500 Alloy K500 K-500 UNS N05500 2.4375 NiCu30Al Forging Forged Pump Shafts Spindles ship shipping marine boat shaftings Down hole Electric submersible pumps ESP motor Splined Shafts
parameters1：
parameters2：
parameters3：
parameters2：
parameters3：
We are professional Monel K-500 K500 Alloy K500 K-500 UNS N05500 2.4375 NiCu30Al Forging Forged Pump Shafts Spindles ship shipping marine boat shaftings Down hole Electric electrical submersible pumps ESP motor Splined Shafts from china
Chemical Composition
| C | Mn | S | Si | Al | Co | Fe | Ni (incl.Co max1,0) | Cu | Ti | Ni | P | Cr | Mo | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2.4375 | Min % | 2,20 | 0,50 | 63,00 | 27,00 | 0,30 | |||||||||
| Max % | 0,20 | 1,50 | 0,015 | 0,50 | 3,50 | 1,00 | 2,00 | 34,00 | 1,00 | ||||||
| (Key to Steel 2010) | |||||||||||||||
| alloy K 500 N 05500 | Min % | 2,30 | 2,00 | rest | 0,35 | 63,00 | |||||||||
| Max % | 0,25 | 1,50 | 0,010 | 0,50 | 3,15 | rest | 0,85 | 70,00 | |||||||
| ASTM B865 | |||||||||||||||
Physical properties
| Property | Value |
|---|---|
| Density: lb/in.3 | 0,307 |
| Hardness: HB | 250 |
| Permeability at 20°C/68°F | 1.0015 |
| non magnetic | up to -210°F |
| Temperature T °C/F (°C/F) | Specific heat J / kgK (Btu / lb °F) | Thermal conductivity W/mK (Btu·in / ft2·h·°F) | Electric resistance µΩ · cm (Ω circ mill / ft) | Modulus of elasticity kN/mm2 (103 ksi) | Expansion rate from 70°F bis T 10-6 / K (10-6 / °F) |
|---|---|---|---|---|---|
| 20 / 68 (93 /200) | 420| (0,100) (0,107) | 17,4 / 121 (136) | 61 (372) | 179 / 26 (25,8) | (7,6) |
| 100 / 212 | 454 | 19,4 | 62 | 13,7 | |
| 200 / 392 (204 / 400) | 480| (0,114) | 20,9 (156) | 63 (378) | 176 (25,5) | 14,6 (8,1) |
| 400 / 752 (427 / 800) | 500| (0,120) | 27,8 (198) | 65 (390) | 168 (23,9) | 15,2 (8,5) |
| 700 / 1292 (760 / 1400) | 567 | (0,141) | 35,7 (262) | 66 (400) | 158 | 16,6 (9,3) |
| 800 / 1472 ( 871 / 1600 ) | 613 (0,157) | 37,4 (282) | 67 (408) | 17,0 (9,6) | |
| 900 / 165 | 685 | 41,2 | 68 | 17,5 |
Mechanical properties (20°C / 68°F)
| Yield strength min ksi | 115 | ||
|---|---|---|---|
| Tensile strength ksi | 1100 | ||
| Elongation % | 20 | ||
| Impact energy ISO-V | |||
| (average value of 3 samples) | |||
| Remarks | |||
Products Search
